iContracting Water
PURONICS Sediment & Carbon Pre-Filter
PURONICS Carbon Block Replacement FilterPURONICS MicroMax 7000 Replacement Filter Pack

Replacement Filters

PURONICS Sediment & Carbon Pre-Filter

SKU ICW-PRE-GAC Pedido pendiente(1)

The pre-filter does the heavy lifting so the stages behind it do not have to. It captures grit and rust while granular activated carbon takes chlorine out of the stream - the single most important cartridge for protecting the life of your reverse osmosis membrane.

Cotizar

1

Reemplazo

Cada 12–16 meses

¿Prefieres un técnico?

Agendar una visita de reemplazo de filtro

Compatible con su sistema

Este paquete es un reemplazo de ajuste directo para:

  • iContracting Water multi-stage RO drinking water systems
  • Stage 1-3 housings on qualifying under-sink systems

¿No sabe qué sistema tiene? Llame al (855) 684-7663 y confirmamos las piezas correctas para usted.

Recordatorio de recompra y mantenimiento

  • Filtros y cartuchos: cada 6–12 meses. Las etapas de sedimento, carbón y alcalina pierden capacidad en un año con el agua del Centro de Florida.
  • Membranas y medios: cada 2–3 años. Las membranas de ósmosis inversa y los medios del tanque duran más, pero deben revisarse a los 2 años.
  • Programa de este artículo: Cada 12–16 meses

Próximo reemplazo

31 de julio de 2027

Características

  • Dual-action sediment capture and carbon reduction
  • Protects the RO membrane from chlorine damage
  • Reduces dirt, silt and rust particles
  • High dirt-holding capacity for Central Florida supplies
  • Consistent flow across the full service life

Especificaciones

Stage
Pre-filtration (Stages 1-3)
Media
Granular activated carbon + sediment
Nominal rating
5 micra
Max. pressure
100 psi

Sistemas compatibles

  • iContracting Water multi-stage RO drinking water systems
  • Stage 1-3 housings on qualifying under-sink systems

Recomendaciones de instalación

  1. 1Close the feed valve and depressurize the system.
  2. 2Unscrew the housing with the supplied wrench and rinse it out.
  3. 3Seat the new cartridge and re-lubricate the O-ring.
  4. 4Hand-tighten the housing, restore pressure and flush for 10 minutes.

Preguntas frecuentes

Opiniones de clientes

"Our well water is rough on filters. This one held flow the whole year."
Luis A.

Productos relacionados

PURONICS Carbon Block Replacement Filter
SKU ICW-CB-01Pedido pendiente

PURONICS Carbon Block Replacement Filter

Advanced carbon block filter designed to improve water taste and odor while reducing chlorine and common contaminants.

  • Extruded carbon block for extended contact time
  • Reduces chlorine taste and odor
  • Targets common taste-affecting contaminants

Compatible con: iContracting Water RO drinking water systems

Cotizar

1
Ver detalles
PURONICS MicroMax 7000 Replacement Filter Pack
SKU ICW-KIT-ROPedido pendiente

PURONICS MicroMax 7000 Replacement Filter Pack

Replacement Filter Pack for the Puronics MicroMax 7000 Reverse Osmosis Filter System. Pack of 3 cartridges: Carbon Block, Reverse Osmosis Membrane and GAC Carbon Sediment Filter (Parts W-PN-1001, W-PN-1002, W-PN-1017).

  • Complete 3-cartridge replacement pack for the MicroMax 7000
  • Color-coded filters for easy identification and ordering
  • GAC Carbon Sediment pre-filter, RO membrane and Carbon Block post-filter

Compatible con: Puronics MicroMax 7000 Reverse Osmosis Filter System

Cotizar

1
Ver detalles